ProWeatherStation Support Site Support Center

The Time is not correct, it keeps changing - How do I manually set the time?

If connected with Wi-Fi, the device time will synchronize with the internet time(UTC Time, you need to set the time zone for local time). 

If you are are connected to Internet and do not set the time zone correctly, the station will reset to UTC (or other configured setting) every night.

Please also note that the Date Format can be set so that it displays either MM-DD-YYYY or DD-MM-YYYY which could seem to display unexpected results if you are accustomed to one format or the other.

Note: The Time settings can also be configured in the WeatherSmartIP software, System / Settings menu.

Console:
2. Setting Mode
2.1 In normal mode, press SET key for 2 seconds to enter the setting mode. Then press ”<” button to transfer among different setting function :

When the desired setting function is displayed, press the ”>” key to start the associated setting menu. Change a setting with the key up/down. Hold the up/down key for 2 seconds will increase/decrease digits in great steps. Press HISTORY key or wait for 30 seconds at any time, device will return to normal mode.

TIME SETTING
After entering setting mode, the first setting function “TIME SETTING” will appear on message board. Use the ”>” key to select the desired sub functions:
a) TIME FORMAT:12H/24H
b) DATE FORMAT:MM-DD-YYYY / DD-MM-YYYY / YYYY-MM-DD
c) TIME: Manual setting of time and date
d) TIME ZONE
e) DAYLIGHT SAVING TIME: switch on/off the reception of DST.
f) NORTH/SOUTH: Set northern/southern hemisphere for moon phase